Filter
Top Products
128-6374
8 of 12
DIRECT FM FREQUENCY SELECTION
The selection of a specific FM frequency can be directly accessed us-
ing the appropriate code; these codes are presented as follows:
8
SYSTEM DEFAULT SHIFT CODE
Defaults refer to the settings that are entered at the factory. When code 31
is entered, the system is reset to the following defaults:
1. All channel presets cancel and revert to channel 184.
2. The LCD backlighting reverts to Green
3. Button confirmation tone is turned on.
4. All channels that were previously Locked Out or Skipped are reinstated
LCD CONTRAST SHIFT CODE
To change the LCD contrast:
1. Enter code 35.
2. Use the Up and Down directional buttons to increase or decrease
display contrast, respectively.
3. Press the SFT button to exit LCD contrast mode.
NOTE: The default frequency is 88.5MHz
EDOCNOITCELES
12zHM1.88
22zHM3.88
32zHM5.88
42zHM7.88
EDOCNOITCELES
52zHM9.88
62zHM1.98
72zHM3.98
4. Repeat the procedure in steps 2 and 3 to save nine other desirable
channels for quick access.
SPECIAL FUNCTIONS USING THE SHIFT BUTTON
There are a number of user preference functions that can be adjusted
simply by using the Shift (SFT) button with a specific number code. These
functions are explained in the following paragraphs.
In general, a shift/code is entered in the following manner:
, where:
(SFT) represents Shift button
activation and
XX represents the
specific function code. (The 4-digit
code always starts with 09.)
SFT
SFT
9
0
Figure 10. Setting Preset Channels
PRESS AND HOLD
ANY NUMBER BUTTON
(0-9) TO COMMIT THE
CHANNEL TO PRESET
MEMORY
SELECT THE
DESIRED CHANNEL
THE PRESET MEMORY
LOCATION APPEARS
HERE
SFT
0
4
7
1
5
8
2
6
9
3
AUDIO OX
The Joint
Khrisp
Oh Baby Oh Baby
-----------------------------------
CH
101
World
6
Figure 11. Modulator Frequency Codes