Filter
Top Products
128-7195
7 of 12
continuously. If you experience a loss of signal
or audio, reposition the antenna inside the
home or outside as necessary.
3. Installing the Shuttle on the Cradle
Install the shuttle as follows:
a. Carefully line up the shuttle rear spine grooves
with the cradle guide spines; slide the latch tab
-7-
lever to the unlock ( ) position, and lower the
shuttle into the cradle.
b. After making sure the connectors are properly
lined up, gently press down on the shuttle to
mate the connectors together.
c. Slide the latch tab lever to the lock (
) position;
the tab will enter the shuttle latching tab recess
to prevent vertical movement. The shuttle
should now be nestled securely in the cradle.
20-PIN
SYSTEM
CONNECTOR
CRADLE
FRONT VIEW
CRADLE
TOP VIEW
LATCH TAB
LOCK/UNLOCK
LEVER
SHUTTLE
LATCHING
TAB
CRADLE GUIDE SPINES
CONNECTOR
GUIDE PIN
ANT RF
CONNECTOR
CRADLE
REAR
VIEW
SHUTTLE
REAR VIEW
SHUTTLE
REAR SPINE
GROOVES
SHUTTLE
LATCHING
TAB RECESS
LATCH TAB
LOCK/UNLOCK
LEVER