Audiovox SIR-BB1 Satellite Radio User Manual


 
128-6945
6 of 12
1.
Turn the Boom Box upside down to access
the battery compartment.
2.
Push the battery cover latches forward and flip
up the battery compartment cover to the open
position.
3.
Insert eight (8) D-Cell batteries observing
battery polarity as shown; then close the cover.
3.Installing the Shuttle in the SIR-BB1
Place the Shuttle in the cradle so that the Shuttle
guides are lined up with the SIR-BB1 cradle. Then
push the Shuttle forward to engage the connectors.
The Shuttle will snap into place. Apply power to the
SIR-BB1 by rotating the VOL control clockwise from
the off position; the LED indicator lights green. If the
Shuttle does not turn on at the same time, press the
red Power On/Off button in the upper left corner of
the Shuttle front panel.
-6-
BATTERY
COMPARTMENT
COVER
BOTTOM OF
BOOM BOX
BATTERY COMPARTMENT
COVER LATCHES
BATTERY
COMPARTMENT
(COVER REMOVED)
NEGATIVE
POSITIVE
NEGATIVE
POSITIVE
2.Cabling Interconnections
You can begin to enjoy Sirius® Satellite Radio
as soon as the Shuttle and Boom Box Kit
installation are complete. Set up your Audiovox
SIR-BB1 by following the interconnect diagram.
4.Removing the Shuttle From the SIR-BB1
Press and hold the eject button on
top of the Boom Box; the
Shuttle will partially eject
forward. Using yourthumb
and forefinger, grasp the
Shuttle on the sides and pull
forward to disengage.