Audiovox PROV715 CD Player User Manual


 
-15-
Remote Sensor
The PROV715 /PROV715S/ PROV715P incorporates two Infrared
sensors which relay signals from the remote control to allow the
unit to be controlled simply by pointing its remote control at the
remote sensor eye. The repeater function allows control of auxiliary
equipment such as an Audiovox Video Cassette Player. The infrared
sensor can relay signals from most manufacturer’s remote controls
to its respective component connected to the Video 1 input. In this
case you must use the remote control supplied with the component.
Accessories
Wireless Headphones
The PROV715 /PROV715S/ PROV715P includes a built-in infrared transmitter for use with Audiovox wireless
headphones (Part Number IR2CHS-Dual channel). The volume can then be adjusted using the controls on each
headset. The wireless headphones must be used within a line of sight from the transmitter, as infrared transmissions,
like visible light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones.
IR2 Input
Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio program
connected to the IR2 input can be received on the B channel of the dual channel wireless headphones (Part Number
IR2CHS).
Headset Special Features
Automatic Level Control prevents input signal over loading.
Uses high frequency infrared light to assure a clean signal for clear reception.
REV FWDSOURCE VOLUME
FM
SELECT
ON OFF AUTO
PAUSE
H
E
A
D
P
H
O
N
E
S
IN
P
U
T
A
U
DI
O
L
R
V
ID
E
O
I
R
S
Remote
Sensor
Eye
Remote
Sensor
Eye