Filter
Top Products
5
Installing the unit
Mounting angle setting lever
Be sure to adjust Mounting Angle
Setting Lever(A) to appropriate
angle; 0for horizontal, 22.5
angle, 45angle, 67.5 angle, 80
angle, or 90for vertical.
Removing the transport
screws
Find the 3 transport screws at the
bottom of the unit, which lock the
units mechanism during transport.
Remove these screws before
installation and attach the supplied
adhesive labels over the holes.
Retain these screws and replace
them in the original positions if the
unit is transported for service or
maintenance.