Audiovox PAB-1500D Stereo Amplifier User Manual


 
HIGH PERFORMANCE AMPLIFIER
This power amplifier has been designed to provide high quality performance with
a minimum of maintenance. However, it's performance will only be as good as the
care and quality of components with which it is installed. We therefore advise that
you read these instructions very carefully to familiarize yourself with the product and
it's features.
Should you require assistance with the installation or wiring of this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.
Monday - Friday
Saturday
8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
1-800-645-4994
HELP!
-1-
SPECIFICATIONS
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
Maximum Output Power:
Mono Operation 1000 watts peak x 1
RMS Output Power: 500 watts x 1 @ 2 ohms
300 watts x 1 @ 4 ohms
THD at 4Ohms: 0.3%
THD at 2Ohms: 0.7%
Signal/Noise Ratio: 65dB
Damping Factor: >20
Input Impedance:
Low-Level 10K ohms
Input Sensitivity: 200mV-4V.
Filter Types:
Variable Low Pass 50Hz to 250Hz,
18dB/Oct
Variable Sub-Sonic 20Hz to 50Hz,
18dB/Oct
Bass Boost +12dB @ 45Hz
+18dB @ 60Hz
Supply Voltage: 12 Volts, Negative
Ground
Dimensions (W x H x D): 10-3/4" x 2-3/8" x 9-1/2"
(273mm x 62mm x 240mm)