Filter
Top Products
normal conditions. In addition, the visibility of the numbers on the LCD may
slightly decrease. The LCD read-out will return to normal when the tempera-
ture increases to a normal range.
bm CASSETTEDOOR
Hold the cassette with the exposed tape edge to the right and insert into the cassette
door. Depress fully until the cassette is engaged and begins playing. When the
cassette reaches the end of the side of the tape being played, the unit will
automaticvally change direction of play as shown by the arrow indication on the
display panel and play of the other side of the cassette will begin.
NOTE: Observe cassette operation Cautions in Care and Maintenance section of this
manual.
bn FAST-FORWARD BUTTON(FF)
Pushing the Fast-Forward button will cause the tape to move rapidly in the forward
direction of play. To stop Fast-Forward movement, lightly push the Rewind Button
bo until the Fast-Forward button disengages.
bo REWIND BUTTON(REW)
Pushing the Rewind button will cause the tape to move rapidly in the reverse direction
of play. To stop Rewind movement, lightly press the Fast-Forward button bn until
the Rewind button disengages.
bp PROGRAMSELECTOR
To manually reverse tape direction and play the other side of a cassette, lightly press
both the Fast-Forward bn and Rewind bo buttons at the same time. The change of
direction will be shown by the arrows on the LCD panel.
bq EJECTBUTTON
Tape playback is stopped and the cassette is ejected by pressing this button, which
also has the function of switching over to radio operation.
br MODE SELECTOR
This button is used to select the audio source in play. During tape play, it can be used
to change to radio play without ejecting the cassette. Similarly, it can then be used
to go back to tape operation from radio play.
NOTE:To prevent damage to cassette tape and/or mechanism, it is recommended
that the cassette be ejected if it will not be played for prolonged periods.
bs TIME/FREQUENCY SELECTOR (T/F)
During radio operation, push this button to call the time display on the incorporated
quartz clock. Pressing the button again will return to frequency display.
During CD changer operation, push this button to call the time display or return to the
disc and track number indications.