Audiovox AV-428V Stereo System User Manual


 
128-6634
13 of 16
1010
1010
10
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTR
OLOL
OLOL
OL
SS
SS
S
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTR
OLOL
OLOL
OL
SS
SS
S
Built into this radio are controls to operate an optional CD
changer. Please check with your Rampage/Audiovox car
stereo specialist for recommendations of the models
that will work with this radio.
Once the changer is installed and properly connected, it
may be necessary to press the RESET button behind the
radio front panel to initialize the complete installation.
Adjustment of the audio functions (volume, tone, balance,
and fader) for the CD changer operate in the same
manner as they do for radio play. The following controls
will operate the CD changer when it is installed and
connected to this radio. Refer to the owner’s manual
included with the CD changer for instructions on the
installation and correct loading and use of the CD
magazine.
dmdm
dmdm
dm CD CHANGER PAUSE/PLAY SELECTOR ( PAU )
During radio, or tape play, press the MODE button to
select operation of the CD changer as shown by CDC on
the display. Disc play will begin, the disc and track
number will be shown on the display panel, and the
center of the disc icon ( ) will become animated. If
a new magazine has been loaded into the changer, play
will begin from the first track of the first disc in the
magazine. If a magazine was already in the changer, play
will resume from the track on the disc previously in play.
During CD changer play, pressing the PAU button once
will stop changer play; PAUSE will appear on the display
and the center of the disc icon will remain stationary. To
resume disc play, press the PAU button again and disc
play will resume from the point at which it was interrupted.
dndn
dndn
dn &
dodo
dodo
do DISC SELECT (DN & UP)
These buttons are used to select the desired disc for play.
To advance to a higher number disc, press the UP button
dodo
dodo
do. To return to a lower number disc, press the DN button
dndn
dndn
dn. The number of the disc in play will be shown on the
display panel.
dpdp
dpdp
dp TRACK SELECT ( / )
This button is used to quickly select the beginning of a
particular track. With each momentary press of the Forward
Track Select button (
), the next higher track number
will be selected as shown on the display panel. Similarly,
with each momentary press of the Backward Track Select
button (
), the next lower track number will be selected.
dqdq
dqdq
dq FOWARD/REVERSE SEARCH (CUE/REVIEW)
High-speed audible search to any forward or reverse
section of the disc can be made with this feature. Press
and hold the forward (cue) button (
) to advance
rapidly in the forward direction, or press and hold the
reverse (review) button (
) to advance rapidly in the
reverse (backward) direction. In either case, the center of
the disc icon will rotate faster when search is active.
drdr
drdr
dr TRACK SCAN SELECTOR (SCN)
When the SCN button is momentarily pressed, the SCN
indication will appear on the display panel, and the first
10 seconds of each track on the disc will be played in
order. When a desired track is reached, press the SCN
button again and play of the selected track will continue
(SCN will disappear from the display panel). The Track
Scan mode will also be canceled by activating any other
disc function (Track Select, Repeat or Random).
When the SCN button is pressed and held for more than
2 seconds, the disc scan mode is activated; DSN will
appear on the display and the first 10 seconds of the first
track on each disc will be played in disc order. This mode
is canceled in the same manner as before.
ds ds
ds ds
ds TRACK REPEAT PLAY SELECTOR (RPT)
When the RPT button is momentarily pressed, the RPT
indication will appear on the display panel and play of the
current track will be continually repeated until the Track
Repeat mode is canceled by pressing the RPT button
again or by activating the Track Select, Random Play or
Scan
functions.
When the RPT button is pressed and held for more than
2 seconds, the disc repeat mode is activated; DRT will
appear on the display and the play of the current disc will
be continuously repeated. This mode is canceled in the
same manner as before.
dtdt
dtdt
dt SHUFFLE PLAY SELECTOR (SHF)
When the SHF button is momentarily pressed, the SHF
indication will appear on the display panel and the tracks
on the disc will be played in a random, shuffled order. The
Track Select buttons
dpdp
dpdp
dp will also select tracks in the
shuffled order instead of the normal progression. The
Track Shuffle mode can be canceled by pressing the SHF
button again or by activating the Track Select, Repeat Play
or Scan functions.
When the SHF button is pressed and held for more than
2 seconds, the disc shuffle mode is activated; DSF will
appear on the display and the play of the discs in the
magazine will be played in a random shuffled order. This
mode is canceled in the same manner as before.