Filter
Top Products
OPERATING INSTRUCTIONS
Note: Number in parenthesis (#) correspond with “Identification of Controls/Connections” on page 1 of this manual.
Tuner
1) Turn power on by turning the Power Switch/Volume Control knob (1) clockwise.
2) Use the Band Selector (2) to select either AM or FM.
3) Use the Speaker Selector Switch (12) to choose speaker output.
4) Use the Tuner Control (4) to select station.
5) Adjust Volume Control (1) to suit taste.
6) If reception is faint, you may improve reception by pressing the Local/Distance Button (8) in.
7) You may also improve reception on a faint station by pushing the Stereo/Mono Button (7) to the “off” position. This puts the radio in
mono mode, and you will not receive stereo reception. The Stereo Light (to the right of the Station Indicator) will light up if you are
receiving a stereo signal.
Cassette Tape Player
1) Turn power on by turning the Power Switch / Volume Control knob (1) clockwise.
2) Use the Speaker Selector Switch (12) to choose speaker output.
3) Press the Cassette Eject Button (11) to eject any cassettes that may already be in the player.
4) Insert a cassette into the Cassette Player (10).
5) The cassette will automatically play when inserted.
6) The Tape Indicator (9) will light up when a cassette is in use.
7) You may fast forward the cassette by pressing the Fast Forward / Eject Button (11) halfway in.
8) To eject the cassette, press the Cassette Eject Button (11).
Auxiliary Input
1) Turn the power on by turning the Power Switch / Volume Control knob (1) clockwise.
2) Push the Auxiliary Switch (6) on.
3) If there is an external source (example: CD shuttle) connected to the Auxiliary In Jacks (17) on the rear of the radio, then you can
listen to your external source through the system.
3