Filter
Top Products
bqbq
bqbq
bq STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set
using the MANU/SKIP
bm tuning
controls.
3. Press the pre-set button to be set
and continue to hold it in for
approximately 2 seconds. The pre-
set number, will appear on the
display panel to the right of the
frequency indication and a single
beep will sound, indicating that the
station is now set into that pre-set
memory position. The station can
now be recalled at any time by
pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band
and for the other 4 bands on the unit.
br br
br br
br RADIO FREQUENCY SCAN
The current radio band can be scaned by
pressing the SCN button; as a result, the
radio will seek the stronger station
frequencies on the band in the upward
direction, and will stop at each of these
stations for 10 seconds before proceeding
on.
bsbs
bsbs
bs LIQUID CRYSTAL DISPLAY (LCD)
The Liquid Crystal Display (LCD) panel
displays the frequency, time, and activated
functions.
bt bt
bt bt
bt POWER LEVEL METER DISPLAY
This display consists of a left and right nine-
bar graph which provides a visual
representation of the audio signal level. As
the signal increases, the number of
illuminated segments will increase and vice-
versa.
bubu
bubu
bu
MODE SELECTOR (MODE)
This button is used to select the CD player
or CD changer (if installed) playback mode,
auxiliary (AUX) input, or radio. Each press
of the button will select a different mode as
indicated on the display panel.
During CD player operation, this button may
be used to change to radio, AUX input (MP3
or external CD player) or CD changer mode
without ejecting the disc. The DISC
indication will remain on the display panel
to show that the CD changer is operating.
Press the button again to return to return to
the desired mode.
clcl
clcl
cl DISC SLOT
With the front panel in the fold-down position,
gently insert the disc into the slot (label
surface facing up) until the soft-loading
mechanism engages and pulls the disc in.
The S--CDP indication will appear on the
display panel for 5 seconds.The (
)
indication illuminates and becomes
animated, the
symbol lights, and the track
number appears on the display panel.
CAUTION: This unit is designed for play of
standard 5" (12cm) compact
discs
ONLY. Do not attempt to
use 3" (8cm) CD-Singles in this
unit, either with or without an
adapter, as damage to the player
and/or disc can occur. Such
damage will not be covered by
the Warranty on this product.
cmcm
cmcm
cm TRACK SELECT ( / )
The Track Select function of the MANU SKIP
buttons are used to quickly access the
99
99
9
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS