Audio-Technica EP3 Headphones User Manual


 
Selecting your replaceable earpieces and checking fit
o
f the earphones
M
edium-sized rubber earpieces are attached to the ear-
phones at shipment. If these do not fit your ears, replace
t
hem with the Small or the Large earpieces. It is important
t
o have the correct and comfortable fit; an incorrect fit will
degrade the audio function of your headphones.
U
sing your in-ear headphones
1
. Connect the headphone cable to the extension
cable/adapter if needed, making certain the plug is
firmly seated. (Use extension cable/adapter with
3
.5 mm stereo mini-plug to connect to MP3, CD player,
D
VD player, computer, and other audio devices
equipped with a 3.5 mm output jack.)
2
. Connectthe headphone cable (or extension cable) to
the headphone jack of your audio device.
3
. Wear the left earphone (marked L) in your left ear, and
t
he right earphone (marked R) in your right ear. Insert
the earpiece on the earphone into your ear so it fits
snugly and comfortably. If fit is not correct, please see
Selecting your replaceable earpieces above. Do not
push beyond the ear canal opening.
Warning: Do not push the earphone sleeve beyond the
ear canal opening.
4. Wear the headphones over the ear with theY cable
toward the front or back. Use the adjustable sleeve to
tighten the cable.
5. Turn on your audio device. (Volume should be set at a
low level at first; adjust as necessary on audio device.)
Check to make certainthe headphones fit correctly and
that there is a good seal between the ear canal and the
rubber earpiece on your earphone; see Selecting your
replaceable earpieces above.
After using your in-ear headphones
After you have finished using your in-ear headphones,
s
tore them in included protective carrying case.
To clean the earphones, wipe with a clean, soft cloth.
Do not use solvents.
For periodic cleaning of earpieces, remove from
e
arphones and wash with warm water. Make certain
earpieces are completely dry before reinstalling on
earphones. Check for any obstructions.
Earpieces will wear over time. Replacement earpieces
a
re available from Audio-Technica dealers.
S
pecifications
*
T
ype Dynamic
Driver Diameter 11.5 mm
Frequency Response 18 –18,000 Hz
S
ensitivity 100 dB/mW
I
mpedance 32 ohms
Weight (without cable) 5 g (0.18 oz)
Cable 110 cm (3.6'),Y-type
C
onnector 3.5 mmTRS stereo
w
ith locking collar
Accessories Extension cable/adapter with
3.5 mm connector; protective
hard carrying case; soft
pouch; interchangeable
earpieces (S,M,L); ear-con-
forming foam tips
*
Specifications are subject to change without notice.
EN
3