Audio-Technica AT-PL50 Stereo System User Manual


 
2
Automatic Stereo Turntable System
Installation and Operation
To prevent electric shock, do not remove the
cover. There are no user-serviceable parts
inside. Internal adjustments are for qualified
professionals only. Refer all servicing to
qualified service personnel.
Pour prévenir un choc électrique, ne pas ouvrir
le couvercle. Il n’y aucune pièces de rechanges
à l’intérieur. Tout ajustement interne doit être
fait par une personne qualifié seulement.
Référez tout réparation au personnel qualifié.
AVIS
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning: To prevent fire or shock hazard, do
not expose this appliance to rain or moisture.
Attention: Pour prévenir feu ou choc
électrique, ne pas exposé l’appareil à la pluie
ou à l’humidité.
Thank you for pur
chasing the AT-PL50. Audio-Technica has
been a leading manufactur
er of innovative stereo phonograph
products for more than 40 years. We are pleased to provide this
turntable, with its excellent performance and many convenient
features, for your enjoyment.
The AT-PL50 stereo turntable system features:
• Fully automatic operation
• Two speeds: 33
1
/
3
rpm and 45 rpm
• Professional aluminum turntable platter
• Integral Audio-Technica Dual Magnet
phono cartridge with
replaceable diamond stylus
• Integral, switchable stereo phono pre-amplifier. Permits use of
turntable with stereo amplifiers having either magnetic-phono
inputs or “AUX” (high-level) inputs; also allows convenient
use of turntable with most powered speakers
• Damped Lift/cueing mechanism with front-panel control
• Handsome removable dust cover
To assure maximum satisfaction from this product, please read
the information and follow the instructions presented in this
manual. Please keep the manual in an accessible location for
future reference.
We suggest that you save all the packaging materials for
possible future storage, moving or shipping.
CAUTION: To avoid stylus damage, make certain the
included stylus guard is in place whenever the turntable
is being installed, moved or cleaned.
Introduction
Stylus assembly
Stylus (“Needle”)
Stylus guar
d