Audio-Technica at2020 usb Headphones User Manual


 
10
11
1. Plug the free end of the USB cable into the USB port on your computer. The
microphone’s blue LED will illuminate, indicating the mic is receiving power. Your
computer will automatically recognize the USB device and install a driver.
2. In the lower right portion of your screen you may see a message that new hardware
was found; or you may see a driver software installation notice.
3. To select the AT2020 USB as your default recording device, begin at your Start menu.
Select Control Panel.
4. Select (double-click) Sound.
Preliminary setup with Windows Vista
5. Select the Recording tab. Make sure that the AT2020 USB microphone is set as
the default recording device. (You should see a green check mark beside the
USB microphone icon.)
EN