Filter
Top Products
Safety Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture. To reduce the risk of electric shock, do not remove
cover (or back); no user-serviceable parts inside. Refer servicing to
qualified service personnel. To prevent electric shock, match the wide
blade of the AC plug to the wide slot of the AC outlet, and insert fully.
ATTENTION
Pour eviter les chocs electriques, introduire la lame la plus large de la
fichedans la borne correspondeante de la prise et pousser jusqu’au fond.
Read Instructions
All the safety and operating instructions should be read before the appliance
is operated.
Retain Instructions
The safety and operating instructions should be adhered to.
Heed Warnings
All warnings on the appliance and in the operating instructions should be
adhered to.
Follow Instructions
All operating and use instructions should be adhered to.
Water and Moisture
The appliance should not be used near water. For example, near a bathtub,
wash-bowl, kitchen sink, laundry tub, in a wet basement or near a swimming
pool, etc.
Ventilation
The appliance should be situated so that its location or position does not
interfere with its proper ventilation For example, the appliance should not be
situated on a bed, sofa, rug or similar surface that may block the ventilation
openings; or be placed in a built in situation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
Heat
The appliance should be situated away from heat sources such as radiators,
heat registers, or other appliances (including amplifiers) that produce heat.
Power Sources
The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
Grounding or Polarization
Precautions should be taken so that the grounding or polarization means of
an appliance is not defeated.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed on or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the appliance.
Cleaning
The speaker should be cleaned only as recommended be the manufacturer.
Non-Use Periods
The power cords of the appliance should be unplugged from the outlet when left
unused for a long period of time.
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into the
enclosure through openings.
Damage Requiring Service
The appliance should be service by qualified personnel when; a) the power cord
or the plug has been damaged; b) objects have fallen, or liquid has been spilled
into the appliance; c) the appliance has been exposed to rain; d) the appliance does
not appear to operate normally or exhibits a marked change in performance; e) the
appliance has been dropped, or the enclosure damaged.
Servicing
The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service
personnel.
Product Servicing
In the event your System 230 fails to operate properly, please contact the dealer
where you purchased the unit, or you may contact AudioSource directly for further
assistance.
Specifications:
Powered Subwoofer: 100W, 30Hz ~ 250Hz
Inputs: Line Level or Speaker Level with Speaker Level Pass Through
LED Power Indicator
Subwoofer Level Control
Low Pass Frequency Adjustment
Frequency Response: Satellites: 180Hz to 20kHz ± 5dB
Center Channel: 180Hz to 20kHz ± 5dB
Subwoofer: 30Hz to 250Hz ± 10dB
Recommended Amplifier Power: 50 to 100 Watts per Channel
Speaker Wire Provided: Center Channel (one piece) = 3m
Satellites (four pieces) = 7m each
Printed in China
© 2003 Phoenix Gold International, Inc.
9300 North Decatur • Portland, Oregon 97203 • tel: 503-286-9300 fax: 503-978-3302
audiosource@phoenixgold.com • www.audiosource.net
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of non-insulated dangerous
voltage within the products’ enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons. The exclamation point
within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.