AudioSource AudioSource AE Series In-Wall Speaker System Speaker User Manual


 
4
AE6S
Specifications
Woofer
Tweeter
Frequency Response
Impedance
Sensitivity
Power Capacity
Outer Dimension
Cut Out Dimension
Mounting depth
6.5” Carbon Filled Poly Cone w/Butyl Rubber Surround
Pivoting 25mm Poly ferrofluid Cooled
50Hz to 20kHz
8 ohm
87dB, 2.83v @ 1m
10 to 100 Watts
8.50” x 12“ (216mm x 305mm)
7.40” x 10.80“ (188mm x 274mm)
3.40” (86mm)
Two Year Limited Warranty
for a limited period of time. For a period of two (2) years from date of original purchase, we
will repair or replace the product, at our option, without charge for parts. Customer must pay for all labor
charges associated with the removal and re-installation of speakers for the limited period and all parts and
labor charges after the limited warranty period expires. The limited warranty period for factory refurbished
products expires after ninety (90) days from date of original purchase. This limited warranty applies only to
purchases from authorized AudioSource Retailers or Distributors. This limited warranty is extended only to
the original purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource
Retailer or Distributor when making a claim against this limited warranty. This limited warranty only covers
failures due to defects in materials or workmanship that occur during normal use. It does not cover failures
resulting from accident, fire, flood, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, modification, service by anyone other than AudioSource , or damage that is attributable to Acts of
God. It does not cover costs of transportation to AudioSource or damage in transit. The customer should
return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return
Authorization.
Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a
product prove to be defective in workmanship or material, the consumer's sole remedies will be repair or
replacement as provided under the terms of this warranty. If the defective product is discontinued
AudioSource may replace the product with an equivalent or superior product at its option. Any cost
of re-installation or repair of wall or ceiling surface is the sole responsibility of the customer and that cost
shall not be the responsibility of AudioSource. Under no circumstances shall AudioSource be liable
for loss or damage, direct,consequential or incidental, arising out of the use of or inability to use the
product. There are no express warranties other than described above.
8100.0366B
AE5S
Specifications
Woofer
Tweeter
Frequency Response
Impedance
Sensitivity
Power Capacity
Outer Dimension
Cut Out Dimension
Mounting depth
5.25” Carbon Filled Poly Cone w/Butyl Rubber Surround
Pivoting 25mm Poly ferrofluid Cooled
70Hz to 22kHz
8 ohm
86dB, 2.83v @ 1m
10 to 100 Watts
7.50” x 11“ (191mm x 278mm)
6.25” x 9.70“ (159mm x 246mm)
2.50” (64mm)
AE8S
Specifications
Woofer
Tweeter
Frequency Response
Impedance
Sensitivity
Power Capacity
Outer Dimension
Cut Out Dimension
Mounting depth
8” Carbon Filled Poly Cone w/Butyl Rubber Surround
Pivoting 25mm Poly ferrofluid Cooled
40Hz to 20kHz
8 ohm
87dB, 2.83v @ 1m
10 to 100 Watts
10” x 14.13“ (254mm x 359mm)
8.75” x 12.75“ (222mm x 324mm)
3.60” (92mm)
New Construction Bracket Order Part Number: BI5
New Construction Bracket Order Part Number: BI6
New Construction Bracket Order Part Number: BI8
AudioSource, a division of Peak Audio Group, warrants this product against defects in materials and workmanship