Filter
Top Products
Stereo Power Amplifier with Internal Bridging
AMP Three
Congratulations on your new purchase and welcome to the AudioSource family of satisfied customers.
We trust you will continue to enjoy the value and quality of your AudioSource AMP Three for many years to
come. To ensure the best performance from your unit, please take a few moments to read this manual. Also,
be sure to retain this document for future reference.
Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.
Owner’s Manual
© 1999 AudioSource, Inc.
Using the Controls
Power
This front panel button will manually switch the AMP Three on or off. A multicolored LED indicates its
power status. To use the Auto On feature, leave this front panel switch in the on position.
Speaker Selector
The AMP Three has two pairs of speaker outputs. Press button A to activate the A outputs. Press button
B to activate the B outputs. Both A and B outputs may be used simultaneously, provided the combined
impedance does not fall below 2 ohms.
Note: Before pressing either of the speaker selector buttons, be sure that the level controls are set at the minimum position.
Input Level Controls
These knobs adjust the incoming signal level and thereby act as volume controls. We recommend that these
be set to max and your signal source (receiver, CD player, preamplifier, etc.) be used to adjust the volume.