Filter
Top Products
This plug connects the amplifier and the remote bass knob using the supplied cable.
This control adjusts the amplifier's input sensitivity. The input sensitivity is variable from 200 Millivolts to 8
volts. Turning clockwise increases sensitivity. Turning counter clockwise decreases sensitivity. This knob
is not a volume control for the amplifier. The amplifier can be driven to full power with a wide range of
input signals. A lower signal level will require increased sensitivity to reach full power. A higher signal level
will require decreased sensitivity.
These inputs are for signal cables from the source. Always use high quality, shielded RCA cables.
1. Bass Boost Gain Remote Control
2. Input Sensitivity Control
3. Low level Input RCA Jacks
CONTROLS & FUNCTIONS
6