Filter
Top Products
11
Getting started
Headset base installation
No lifter mode or lifter mode
There are two answer modes available on the
headset base. The current mode is indicated
by two lights on the front of the headset base
named NO LIFTER MODE and LIFTER MODE.
When plugging your headset base into the
telephone wall jack (installation option 1 or 2),
make sure the headset base mode is set to NO
LIFTER MODE.
-OR-
When connecting your headset base to a
multiple line corded telephone (installation
option 3), make sure the headset base mode is
set to LIFTER MODE.
To change the answer mode:
When the headset is not in use, press MODE on
the headset base to select NO LIFTER MODE or
LIFTER MODE. The corresponding light on the
front of the headset base turns on to indicate the
current mode.
For complete instructions on installing and
using the handset lifter, see the TL7000 handset
lifter user’s manual. You may also download the
manual at
www.telephones.att.com.
NOTE: If you are using the handset lifter (model TL7611, or
sold separately as model TL7000), you must use the LIFTER
MODE.
•
•
MODE