Atlona AT-CV42M Home Theater System User Manual


 
4
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1. DC power plug-park input connector. Ensure that the plug-park used is an approved type and has sufficient
current carrying capacity with the correct voltage and connector polarity. 12Volt DC power supply 0.66A Max.
Power Jack:
DC Jack - inner OD O 2.1mm (+ )
Outside OD O 5.5mm (GND)
Power input - 12VDC, 0.66A
2. INPUTS: 1-4 Component/Stereo Audio. Connect desired source of Component Video(YPBPR)/Stereo Audio
devise to the switcher.
Inputs 1-4 port source signals :
Component Video(YPBPR),
3x RCA Connectors,
Stereo Audio(AR/AL),
2x RCA Connectors
Component Video (YPBPR) Via 3x RCAs
Stereo Audio(AR/AL) Via 2x RCA connectors
Note: With 6x RCA female connectors.
3. OUTPUTS 1- 2 Component/Stereo Audio. Connect desired signal with Component Video(YPBPR)/audio
direct to Female RCA connector. This connector supports component video & audio to HDTV display device.
Outputs 1- 24 display port signals :
Component Video(YPBPR),
3x RCA Connectors,
Stereo Audio(AR/AL),
2x RCA Connectors
Component Video (YPBPR) Via 3x RCAs
Stereo Audio(AR/AL) Via 2x RCA connectors
Note: With 5x RCA female connectors.