Filter
Top Products
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL6-1439
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
SE
SI
TVTA
VTC
SFP
FP
AR
MR
VT / VTF SERIES ACCESSORIES (ORDER SEPARATELY)
ENCLOSURES
Model SE. Surface-mounting exterior backbox provides weatherproof installation for VT Series
loudspeakers. Unit is tapped for
1
⁄2" conduit and includes a weatherproof gasket. Dimensions:
4
1
⁄4" SQ x 2" D (108 x 51mm). Weight is .75 lbs (.35 kg). Housing is die-cast zinc finished in a
durable epoxy. Suffix model with color designation: Red (R) or Neutral Gray (N).
Model SI. Surface-mounting indoor backbox for SVT Series models mounts to any single or
double-gang backbox for concealed conduit applications. CRS unit includes
1
⁄2" conduit knock-
outs (three on each side; five on rear). Epoxy-finished surface. Dimensions: 4" SQ x 1
1
⁄2" D
(102 x 38mm). Weight is .7 lbs (.3 kg). Suffix model with color designation: Red (R) or Neutral
Gray (N).
Model TVTA. Twin housing for bi-directional mounting of two independently powered VT
Series models. Unit is recommended for wall or ceiling installation in corridors and walkways.
Each unit includes 2
3
⁄4" D (70mm) housing with base and adapter plate for parallel mounting to
any 4" SQ or single-gang electrical backbox for distortion-free, bi-directional projection. Weight
is 1.5 lbs (.7 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).
BAFFLE COVER
Model VTC. Baffle cover converts Model TVTA (above) into a uni-directional unit for single
loudspeaker installations. Die-cast zinc construction is finished in baked epoxy and is identical
to the VT Series loudspeaker housing. Dimensions: 4
1
⁄4" SQ x 1
7
⁄8" D (108mm x 48mm). Weight
is .5 lbs (.2 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).
ADAPTER PLATES
Model SFP. Semi-flush adapter plate mounts behind VT Series to cover any recessed 4" SQ x
1
1
⁄2" D (102mm x 38mm) outlet box. CRS wall plate is stamped and painted. Dimensions: 6" SQ x
7
⁄32" D (152mm x 6mm). Weight is .5 lbs (.2 kg). Suffix model with color designation: Red (R) or
Neutral Gray (N).
Model FP. Flush adapter plate for VTF Series loudspeakers allows recessed mounting to stan-
dard 4
11
⁄16
" (119mm) backboxes. Unit is also suited to mount solid exterior or hollow interior wall
surfaces where a backbox is not required. Weight is .4 lbs (.18 kg). Unit is of CRS stamped
construction; not painted.
ADAPTER RINGS
Model AR. Adapter ring for recessed mounting of VTF Series units. Welded steel collar is
4" SQ x 2" D (103mm x 51mm) to provide necessary extension for any 4" SQ x 2
1
⁄8" D
(102mm x 54mm) E.O. box. Weight is .6 lbs. (.27 kg). When assembled, the unit is 3
1
⁄16"
deep and will fit in a standard 4" stud wall. Assembly includes four “S” clips. Finished in
neutral gray.
Model MR. Overlapping extension ring is equipped with clips for recessed mounting of VTF
Series models. Welded steel collar is 4
11
⁄16" SQ (I.D.) x 2" D (119mm x 51mm) to provide exten-
sion for any 4
11
⁄16" SQ (O.D.) x 2
1
⁄8" D (119mm x 54mm) backbox. When assembled, the unit is
3
1
⁄16" deep and will fit in a standard 4" stud wall. Assembly includes four “S” clips. Weight is .7
lbs (.3 kg). Finished in neutral gray.