Atlas Sound AHSUB15S Speaker User Manual


 
3/6
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004339 RevA 5/12
AH Series Stadium Subwoofer
AHSUB15S
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Ground Installation
General considerations and hardware recommendations
Excellent results may be achieved by mounting the AHSUB15S under bleacher seating. Electronic delay is suggested to approximate time alignment
of full range speakers with subwoofer(s) to the listener locations. Use AHSUBSTAND for this mounting configuration.
Overhead Suspension Installation
Remember that wind will add considerable torque to the point of attachment. The mounting surface the speaker is being attached to should be able to
handle five or more times the weight of the AH speaker (7x recommended for locations subject to high wind forces).
The installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and
securely attached both to the loudspeaker and the surface in question. A general rule for soft surface installations (wood beams) is to multiply the
corresponding working load limit by 75%: the result will be an approximate working load strength.
CAUTION: The AHSUB15S weighs 181 pounds (82.1kg). A fall from almost any height could result in serious injury or death. Assure that the speaker
is firmly mounted to an object that can handle the weight. For on ground installation a 36" square 2" thick (minimum) concrete pad is suggested. If this
pad is to be poured concrete, rebar anchors are suggested to allow chain or cable securing of the AHSUB15S for theft resistance.