Atlas Sound AARMK2-5 Stereo Amplifier User Manual


  Open as PDF
of 2
 
Illustration 2: Rack Mounting One Amplifier
Configuration #2 - Mounting one AA35 or PA601
1. Disconnect amplifier from electrical source.
2. Remove the four feet.
3. Remove front two screws from sides of amp.
4. Align and secure the chassis extension plate to a rack ear using the enclosed screws and nuts.
5. Align the rack ear and extension assembly to the chassis holes on the side of the amp.
6. Use the enclosed chassis screws to attach the rack ear and extension assembly to the chassis.
Secure firmly, do not over tighten. Attach the other rack ear to the opposite side of the amp.
7. Install into rack using rack rail screws and washers provided.
8. Disregard any additional pieces.
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2006 ATLAS SOUND LP Printed in U.S.A. 00406 ATS002329 RevA 04/06 PP
INSTALLATION INSTRUCTIONS
AARMK2-5
 previous