Specs
Type 2-way
Drivers Woofer 6½” (165mm) GLH*
Tweeter 1” (25mm) LRT soft dome
Frequency Response 57Hz – 20kHz ±3dB
Nominal Impedance 6 Ohms
Crossover Frequency 2.4kHz, 3rd order
Sensitivity 88dB
Recommended Power 10 – 100 Watts RMS
Overall Dimensions 8¾ x 12
1
⁄8 x 3¾”
(W x H x D) 223 x 308 x 96mm
Cutout Dimensions 7
5
⁄8 x 11”
(W x H) 194 x 280mm
Net Weight 6lbs; 2.7kg each
*Graphite Loaded Homopolymer
The IWTS-4 LCR uses a separate baffle/frame installation assembly, so the frame
and grille can be installed first and painted to match the room at the time the walls
are being painted. The speaker baffle simply screws into the frame at a later date.
Very convenient.
A 3-position High Frequency switch located on the baffle lets the user tailor the
speaker’s sound to the room’s acoustics, or to adjust the HF balance for personal
taste. For the perfect finishing touch, the IWTS-4 LCR incorporates an aluminum
tweeter faceplate with a precision horn, which optimizes the tweeter’s dispersion and
gives the speaker an unmistakably consistent family appearance in keeping with our
more expensive in-wall models.
Gold plated connectors
Audiophile-grade crossover
Atlantic’s renowned 1” LRT™ soft
dome tweeter
Paintable grille and frame
Adjustable High Frequency switch
©2008 Atlantic Technology
•
343 Vanderbilt Ave.
Norwood, MA 02062
•
781.762.6300
www.atlantictechnology.com 2.08
Atlantic Technology is a registered trademark of Atlantic Technology
International. Specifications subject to change without notice.
IWTS-4 LCR In-Wall HT System