2
IWTS-28 SUB In-Wall Subwoofer
For Future Reference
Record your serial numbers and date of purchase here:
Model Number
Serial Number
Date of Purchase
The serial number is found on the back panel.
Safety Precautions
Copyright © 2008 Atlantic Technology International.
Specifications are those in effect at the time of printing. Atlantic Technology reserves the
right to change specifications or designs at any time without notice.
Model IWTS-28 SUB
In-Wall Subwoofer
Thank you for purchasing Atlantic Technology products. Our speaker sys-
tems have been designed to deliver exceptional sound and value. We hope
you like what you hear from them, and are happy with your decision to
buy them.
Please take a few moments to read these instructions. They’re intended not
only to tell you how to mount the speakers, but how to get the best perfor-
mance from them.
Important Considerations Before
Installation
Recommended Wire Sizes
The longer the wire run, the heavier the wire should be. Use the following
recommendations as a guide for your installation. And if you’re in doubt,
remember that it never hurts to get the next heavier grade of wire. Also note
that lower gauge numbers equal heavier wire sizes.
Wire Run Wire Gauge:
<15 ft. 16 ga.
15 to 30 ft. 14 ga.
>30 to 50 ft. 12 ga.
Table of Contents
Safety Precautions
2 Model IWTS-28 SUB
2 Important Considerations Before Installation
2 Recommended Wire Sizes
3 Location Considerations
4 Connecting the IWTS-28 SUB to Your Sustem
4 To Connect as a Powered Subwoofer
4 To Connect as a Passive Bass Module
5 Mounting the IWTS-28 SUB
5 Installation of the IWTS-28 SUB in New Construction
5 Installation of the IWTS-28 SUB in Existing Construction
5 Removing and Installing the Grille
5 Treating the Wall Cavity
5 Cutting the Opening
6 Installing the Mounting Frame
6 Painting the Speaker Assembly
6 Speaker Connection and Assembly
6 Installing the Speaker Enclosure Into the Frame
7 Front Panel Controls
7 Low-Pass Control
7 IR Knockout
7 Specifications