Atlantic Technology 10 CSB Speaker User Manual


 
Atlantic Technology is a registered trademark and Clear Filter
Technology is a trademark of Atlantic Technology International.
Specifications subject to change without notice.
The Atlantic Technology powered subwoofer
has been engineered using the latest technology
and finest components available.
High-Performance Driver – Long-throw composite cone driver with vented motor
structure and oversized, high temperature voice coil. This powerful driver has a very
stiff cone that acts like a piston throughout its operating range. The massive motor
assembly and high temperature component parts deliver exceptional performance
and reliability.
Sealed Enclosure Design –
Sealed enclosure woofer designs are inherently low
in distortion, and deliver deep smooth bass response with a gradual and predictable
roll-off below resonance. As with all Atlantic Technology subwoofers, we have paid
close attention to providing accurate musical bass reproduction along with terrific
special effects.
High-Current Amplifier – The output stage of this amplifier is capable of very
high current delivery for exceptional driver control and cool operation. It has been
precision matched and equalized to our rugged driver.
Together they deliver powerful, controlled bass with great articulation and authority,
with a useful in-room working frequency range of 25Hz to 150Hz.
Adjustable (40Hz to 140Hz)@18dB per Octave Low Pass Crossover – The
steep upper end roll-off slope of 18dB per octave allows for much better bass
integration with the satellite speakers while making the woofer less localizable.
Complete Hookup Flexibility – The subwoofer has low-level inputs; a Y-adapter is
included to allow daisy-chaining or to split the receiver/processor’s output to drive
multiple subs. There are also high-level inputs and outputs which include high-pass
filtering tailored for use with Atlantic satellites.
Specifications
10 CSB
Type/Features Powered sub
High current amplifier
Bass Driver 10” (254mm) long-throw,
down-firing
Output Power 180W RMS
Distortion (amplifier) <0.5%
Frequency Response 30Hz – 250Hz ±3 dB
Low Level (line) Input 20k Ohms
High Level Input 100 Ohms
Peak Output 106dB SPL into 2000 ft
3
Dimensions (WxHxD) 22 x 19½ x 12 in
(559 x 496 x 305mm)
Weight 32 lbs (15 kg)
Power Requirements 110-120/220-240V, 50/60Hz
Phase Invert Switch – This switch allows precise
acoustic matching with satellite speaker systems whose
output may be phase reversed. This switch also allows
you to compensate for unusual room acoustics that may
occur when the woofer is physically separated from the
main speakers.
Automatic Standby Operation with LED Indicator
Automatic standby features signal sensing turn-on with
a 7-10 minute turn-off delay. There’s a multi-color LED
status indicator that lets you know when the unit is on
or in standby. Automatic Standby can be defeated by
placing the rear-mounted switch in the ON position.
10 CSB Corner Subwoofer
©2006 Atlantic Technology
343 Vanderbilt Ave.
Norwood, MA 02062
781.762.6300
www.atlantictechnology.com 2.06