Ashly MQX-1310 Stereo Equalizer User Manual


  Open as PDF
of 2
 
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
Internet: http://www.ashly.com, email: info@ashly.com
Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,
Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and
Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.
Applications:
Churches, Studios, Concerts, Dance/Night Clubs, PA Systems, Auditoriums, Lecture Halls, Sports Stadiums, Outdoor Festivals
General Specifications MQX-1310
INPUT TYPE: Active Balanced
INPUT IMPEDANCE: 20K ohm Balanced, 10k ohm
Unbalanced
MAX. INPUT LEVEL: +23dBu
OUTPUT TYPE: Pseudo-Balanced*
OUTPUT IMPEDANCE: 200 ohm Balanced, 100 ohm
Unbalanced
MAX. OUTPUT LEVEL: +23dBu
CONNECTORS: 1/4 Phone jack, XLR and Barrier
Strip
FREQUENCY RESPONSE: ± .25dB
TOTAL HARMONIC DISTORTION: < 0.01% @ +20dBu
IM DISTORTION (SMPTE): < 0.01% @ +20dBu
OUTPUT HUM AND NOISE: < -92dBu (20Hz - 20kHz unweighted)
CROSSTALK: NA
FILTER TYPE: Constant Q/Wein Bridge
BANDWIDTH: 1/3 octave
TOLERANCE: ±3%
RANGE: ±6 or ±15 dB
SUBSONIC FILTER: 18dB/octave @ 40Hz, switchable
POWER REQUIREMENTS:
Nominal Voltage: 90-125VAC, 50-60Hz,
(240VAC available)
Minimum Voltage: 90VAC
Power: 10W
SHIPPING WEIGHT: 8 lbs
DIMENSIONS: 19L x 1.75H x 6D
Rear Panel MQX-1310
*Pseudo-balanced output is single ended signal with balanced impedance
 previous