Ashly FTX-1501 Stereo System User Manual


  Open as PDF
of 2
 
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
Internet: http://www.ashly.com, email: info@ashly.com
Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,
Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and
Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.
Applications:
Churches, Studios, Concerts, Dance/Night Clubs, PA Systems, Auditoriums, Lecture Halls, Sports Stadiums, Outdoor Festivals
General Specifications FTX-1501
Power Output
(Maximum Average Power, .1% THD, 1KHz)
Rated Per Channel, Both Channels Driven
2 ohms: 275 Watts RMS
4 ohm: 275 Watts RMS
8 ohm: 185 Watts RMS
Mono Bridged:
4 ohms: 550Watts RMS
8 ohm: 550Watts RMS
(FTC Continuous Power, 0.1% THD, 20Hz - 20KHz)
Rated Per Channel, Both Channels Driven
Stereo (per channel):
4 ohm: 250 Watts RMS
8 ohm: 175 Watts RMS
Mono Bridged:
8 ohm: 500W RMS
Total Harmonic Distortion:
8 ohm: .01% 1kHz,
8 ohm: .05% 20Hz,
8 ohm: .1% 20kHz
IM Distortion (SMPTE): .17%, 8 ohm
IMD (IHF): .05%, 8 ohms
Hum and Noise (20Hz - 20KHz unweighted): -100dB from full output
Damping Factor: >250, 8 ohm, <1kHz
Bandwidth: 100kHz
Slew Rate: 50 V/µS
Frequency Response: ±0.2dB 20Hz-20kHz
Rise Time: 2µS 10%-90%
Full Power Input Sensitivity: 1.3V
Power Requirement: 110-125VAC, 50-60Hz (240V
Available)
Dimensions: 19L x 3.5H x 16.5D
Shipping Weight: 46 lbs
Specification conditions are: 120VAC mains at 60Hz, 25° C
Rear Panel FTX-1501
 previous