Filter
Top Products
SRS1000 Theater Sound Owner's ManualSRS1000 Theater Sound Owner's Manual
----- 2 -----
Front Panel Controls:
* Radio Gain adjustment
* TV Gain adjustment
* 3D Field adjustment
* Radio Mode LED indicator
* TV Mode LED indicator
* 100Hz adjustment
* 1KHz adjustment
* 10KHz adjustment
Rear Panel Connections:
* Main connector (Molex 16 pin, locking type). Handles power, speakers,
subwoofers, and TV mode trigger I/O's.
* Radio low level input (RCA L/R)
* TV low level input (RCA L/R)
* TV high level input (3.5mm mono jack)
* Radio high level input (8 pin Molex, locking type) for Radio speaker
feed direct
Benefits:
Natural 3D sound image from any two speaker stereo system
Based on characteristics of the human hearing system for natural, non
fatiguing sound
Supports mono, stereo, and surround sound for enjoyment with any
input material.
Fully immersive sound without a discernible sweet spot, allowing
superb sound from any listening position.
60 U. S. And foreign patents issued.
About the Technology:
SRS , the Sound Retrieval System , came about after many years of
research on the psychoacoustic of sound and the dynamics of the human
hearing system. SRS retrieves the spatial information from recordings
and restores the original three-dimensional sound field. As a result, the
reproduced sound is much closer to a live performance. Like live
performances, SRS has no critical listening position (sweet spot).
Listeners can move around the room and continue to be immersed in full
three-dimensional sound.
How the Technology Works:
A microphone does not possess the ability to inter pret the direction a
sound is coming from in the same way that the human ear does. However,
when the audio source is recorded, directional audio cues are still present
in the recording. Without the proper processing of the ambient
information, traditional stereo reproduces a flat, two-dimensional sound
field.
By breaking down the stereo signal into its various signal components,
it is possible to isolate and restore these spatial cues and place them in the
proper space relative to the direct sounds, such as a soloist or dialogue.
These spatial cues are restored by the use of Head Related Transfer
Functions (HRTFs) , which process ambient sounds via patented
frequency response correction curves.
SRS1000 Theater Sound Owner's ManualSRS1000 Theater Sound Owner's Manual
----- 3 -----
Stereo has a narrow sweet spot
SRS 3D Sound expand the stereo sweet spot
1998 SRS Labs, inc. All Rights Reserved. SRS, the SRS logo, Sound Retrieval System are registered trademarks of SRS Labs, Inc.
All other corporate and brand names are trademarks of their respective holders.
Provides a Three-Dimensional Image from a
Standard Stereo Source!