Filter
Top Products
8
Wall Mounting Your 522D-SS Dipole/Bipole Speakers
Your 522D-SS surround sound speakers have built-in wall mounting brackets. Follow
the steps below to safely mount your speakers. Wall mounting will require skill with
basic tools like a level, drill and screwdriver.
Step 1: Make sure the wall you have selected can support the speakers.
Step 2: Hold the speaker in position to make sure it does not interfere with
electrical wiring or plumbing.
Step 3: Use a level as a guide and lightly draw a 18” long pencil line on the wall.
Step 4: Attach the included template to the wall by aligning the line with the level
line you have drawn on the wall.
Step 5: Drill a 3/32” pilot hole in the center of each of the keyhole mounting
locations as shown.
Step 6: If you are certain there is a stud behind the wall surface, drive the supplied
screw through the wall and into the stud as shown in the illustration below.
Step 7: If there is not a stud behind the wall, install the wall anchor as shown in
the illustration below.
Step 8: Tighten the screws into the stud or wall anchor and leave 1/4” of the
screw head protruding from the wall.
Step 9: Install the rubber bumpers to the corners on the back of each speaker.
Step 10: Connect the speaker wires to the speaker.
Step 11: Line up the keyhole slots on the back of the speaker so the screw heads
pass through the large center hole then slide the speaker down.
Step 12: Pull on the speaker gently to be sure that the screws and brackets are
properly aligned and attached to the wall securely.
Optional Wall Mounting Method
In addition to the flush keyhole mounts, your speakers are also supplied
with dual 1/4”-20 threaded inserts on the back to accommodate a wide
variety of industry standard wall mounts. These mounts can be used when
there are clearance problems that require space between the back of the
speaker and the wall. Aperion carries a variety of wall mounts. Please call
us or visit our website if you need assistance selecting a wall mount or
installing your surround sound speakers.
Wall Stud Installation
Hollow Wall Installation
1/4”
Wall Stud Installation