Filter
Top Products
5.1 Home Theater Connection - Low Level Sub Output
+
-
+
-
+
-
+
-
+
-
A/V Receiver
Processor/Amplifier
Center
Front
Rear
- +
Sub
Out
L
R
- +
- +
RL
- +
- +
Left Surround
Right Surround
Left Front
Right Front
Center
SW-12 Amplifier Shown
11
Low Level Sub Output
While setting up a home theater system
is more complicated than a stereo
system, it doesn’t have to be difficult.
Please refer to the diagram on this page
for complete speaker wiring instructions.
If your receiver does have a “sub out”
connection, you will need an RCA
terminated interconnect cable to
connect the receiver to the subwoofer.
NOTE: Your subwoofer is supplied with
two low-level inputs (L&R), but if your
receiver or processor has a single sub-
out connector, connect it to the input
labeled “5.1 sub input” or you can use
a “y” plug to connect to both the left
and right inputs. We recommend use
of a “y” plug which will give you a +3dB
boost in output.