Aperion Audio SW-12 Speaker User Manual


 
What You’ll Need for Installation
A little planning will make your installation a breeze. You’ll want
to have all of the necessary equipment and supplies by your side
before you begin. You’ll save yourself the headache of a last-
minute trip to the store mid-installation.
For your convenience, Aperion Audio carries high-quality wires,
cables, and connectors. Visit our web site www.aperionaudio.com
if you need these accessories.
For Stereo or Multichannel Music Installation:
· Two or more Aperion Audio satellite speakers
· One or more Aperion Audio subwoofer(s)
· A stereo receiver or stereo amplifier and preamplifier
· An audio source: CD, DVD, turntable, tape player, etc.
· Speaker wire (14 gauge or better) with banana clips, spade
terminals, or pin-type termination. Note: 5-way binding posts
will accept bare wire but terminated speaker wire is the
preferred connection method.
· Subwoofer connection materials: RCA terminated interconnect
cable or additional speaker wire if making a speaker-level
connection to your subwoofer. Note: Low level RCA connection
is the preferred connection method.
· Source interconnects: Digital coaxial or optical interconnect
or RCA cables depending on your equipment.
For Multichannel Home Theater Installation:
· Five or more Aperion Audio satellite speakers
· One or more Aperion Audio subwoofer(s)
· A multichannel receiver or amplifier and processor
· An audio/video source: DVD, laserdisc or VCR player
· Speaker wire (14 gauge or better) with banana clips, spade
terminals, or pin-type termination. Note: 5-way binding posts
will accept bare wire but terminated speaker wire is the
preferred connection method.
· Subwoofer connection materials: RCA terminated interconnect
cable or additional speaker wire if making a speaker-level
connection to your subwoofer. Note: Low level RCA connection
is the preferred connection method.
· Source interconnects: Digital coaxial or optical interconnect
or RCA cables depending on your equipment.
2