Filter
Top Products
4. Connect the provided power cord to the fan panel. To ensure polarity
protection, align TIP to +.
Note: Reversing polarity will not damage the fan panel, but the fan panel will
not operate until the power cord is connected correctly.
5. Ensure that the voltage switch on the power supply is set to at least 7 Volts
and that no wires or other obstructions can come in contact with the fans.
Note: The universal power supply voltage must be set to 12 Volts when used
with the rack fan temperature controller.
6. Plug in the power supply to turn on the fan panel.
Control the speed and noise level by adjusting the voltage on the power
supply.
Enhance the effectiveness of the fan panel by changing the airflow
direction and the position of the panel.
NetShelter AV Rack Cooling Installation 3