Filter
Top Products
When “SETUP
–
DLT SAVING” is displayed, pressing the Mode
button brings up the following menu:
SETUP DST Y
MAR 2 NOV 1
This submenu shows you a summary of all the daylight savings
time parameters. The “Y” next to the “DST” indicates yes,
daylight savings time is observed in your region. On the
second line, there are 4 items, the spring forward month
(March in this example), the spring forward Sunday (note that
the 2 in this example means the second Sunday of March, NOT
March 2
nd
), the fall back month, and the fall back Sunday.
This menu does not allow edits. It allows you to quickly see all
the daylight savings time parameters. If you do not wish to
change any of them, press the Up key to return to the
previous menu. If you need to change any parameter, press
the Mode key and cycle through the next 5 submenus.
Changes made in each submenu are saved when you press the
Mode key. If you press the Power button, you will exit Setup
Mode and not save the change made in the current submenu.
The default parameters shown below reflect the Energy Policy
Act of 2005, which took effect in 2007.
SETUP DST
OBSERVE? Y
Use the up/down keys to set whether the unit resides in an
area that observes daylight savings. Press the Mode key to go
to the next submenu.
SETUP DST
SPRG FWD MAR
Use the up/down keys to set the spring forward month, when
daylight savings time begins. Press the Mode key to save the
change and go to the next submenu.