Filter
Top Products
Field Strength Measurement
The procedure below details steps required making a field strength measurement with the
Site Master.
Required Equipment
q
Site Master Model S114C or S332C with tracking generator option
q
Antenna of your choice
Procedure
Step 1. Press the
ON/OFF key on the Site Master.
Step 2. Use the antenna editor feature of the Site Master Software Tools to define an an
-
tenna.
Step 3. Upload the antenna information to the Site Master.
Step 4. Press the
MEAS key.
Step 5. Select the
FIELD STRENGTH soft key.
Step 6. Press the
SELECT ANTENNA soft key.
Step 7. Use the Up/Down arrow key to choose the desired antenna and then press the
ENTER key
Step 8. To change the unit of measurement, press the
AMPLITUDE hard key, and then
press the
UNITS soft key to select dB, dBV, dBmV or dBmV.
The Site Master will automatically scale the display by the antenna factors selected.
5-8
Chapter 5 Spectrum Analyzer Measurements