Filter
Top Products
MOUNTING ACCESSORIES
SB-30: Speaker Stand Bracket
A multi-purpose bracket used for mounting the AN-30 to a wall or ceiling.
SS-300: Speaker Stand
Durable light-weight stand for AN-30 speaker (stand receptacle molded into case bottom)
AN-30 DESCRIPTION
& APPLICATIONS
The AN-30 speaker may be the smallest system in the An-
chor Audio product line but it’s big in power with 109 dB
of sound from 30 watts of rated power output. The AN-30
can cover a typical sized conference room or classroom with
ease. The AN-30 is so lightweight, at under two pounds,
that it mounts effortlessly to a wall or ceiling bracket. It has
a shielded magnet speaker that won’t cause interference
when installed near video monitors.
Applications for this product include foreground and back-
ground music systems, music playback, full-range paging
and instructional applications. Combine an AN-30 and pro-
jector in a classroom for the perfect audio visual solution.
The AN-30 case is available in your choice of black, blue,
red, yellow or transparent to blend into any environment.
A variety of mounting accessories are available for wall,
ceiling and speaker stand installations.
NEED MORE HELP? Call Anchor Audio Customer Service 888-444-6077
or Visit Our Website www.anchoraudio.com
ARCHITECTS’ SPECIFICATION
The monitor speaker shall be an Anchor AN-30 or equiva-
lent. The general construction shall include an injection-
molded case, one 4.5” Neodymium woofer and input termi-
nations consisting of both 3.5 mm and 1/4” phone.
The maximum speaker dimensions shall not exceed 5.5”
high, 5.5” wide and 6.5” deep. The maximum weight shall
be 1.5 pounds.
The case shall be formed by injection-molded high-impact
polycarbonate, and shall have a smooth finish of black,
blue, red, yellow or transparent color.
The woofer shall be magnetically shielded so as not to cause
video interference, and shall be protected by a polycarbon-
ate grill molded into the case.
The monitor speaker has the ability to be mounted on
walls, ceilings, equipment racks and speaker stands with
appropriate hardware and accessories.
1. Attach mounting bracket
securely to wall/ceiling with
pre-drilled holes.
Waste electrical and electronic products must not be
disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority
or Retailer for recycling advice.
2. Remove allen head screws from
bracket mounts on AN-30.
3. Align hole on bracket arm with
mounting hole AN-30 case.
4. Secure speaker to mounting
bracket on both sides.
ATTACHING AN-30 TO SB-30 SPEAKER BRACKET
AN-30 speaker (including allen wrench & two allen head screws) and SB-30 speaker bracket for wall or ceiling mounting.
NOTE: When connecting multiple AN-30 units (daisy chaining) stereo cable
MUST be used to avoid interference.