Filter
Top Products
MAX-CSD10 Web Interface
47
MAX-CSE/MAX-CSD10 Operation/Reference Guide
To change NetLinx settings for the MAX-CSD10:
1. From the NetLinx page, select the Connection Mode to be used from the drop-down menu.
2. If you selected Auto from the Connection Mode drop-down menu, enter the new System Number, if
applicable.
3. Enter a new Device Number, if necessary.
4. If you selected URL from the Connection Mode drop-down menu, enter a new Master IP/URL, if
necessary.
5. Enter a new Master Port Number, if necessary.
6. If encryption is allowed on the NetLinx Master, select whether to Enable or Disable encryption.
7. Enter your Netlinx Master Username and password.
8. If you wish to make the changes to the NetLinx settings, click the Accept button. If you wish to
keep the original settings, click Cancel.
IP Settings Page
The IP Settings page (FIG. 29) allows you to view or modify the IP and DNS settings for the MAX-
CSD10.
To make changes to the IP Settings page:
NetLinx Page Features (Cont.)
Username The selected username of the NetLinx Master administrator.
Password The password for access to the NetLinx Master.
FIG. 29
IP Settings Page
IP Settings Page Features
• IP Selects whether the IP access is dynamic or static
• Host Contains the name of the host machine referred to by the IP address.
• IP Address The IP address reserved for the MAX-CSD10.
• Subnet Mask The subnet mask address reserved for the MAX-CSD10.
• Gateway The gateway address reserved for the MAX-CSD10.
• Domain Suffix The domain name suffix for the URL being used by the MAX-CSD10.
• Primary DNS The primary DNS number for the MAX-CSD10.
• Secondary DNS The secondary DNS number for the MAX-CSD10.
• Reboot Reboots the MAX-CSD10 after making and saving changes.