Filter
Top Products
Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www.
audio.com
PERFORMANCE SPECIFICATIONS
Gain: 28dB maximum, 0dB at 12 o’clock pot position
Nominal Levels: +4dBu in, +4dBm out to 600 ohm balanced load
Peak Levels: +24dBu in, +22 dBm out to 600 ohm balanced load
Noise 20kHz B.W.: -90dBm maximum output
Harmonic Dist.: .02% Max at Peak Level
20Hz to 20 kHz .005% max at Nominal Level
Frequency Resp.: +.25dB, 20 to 20,000Hz
Crosstalk: 70dB minimum at 10kHz
Input Impedance: Balanced, 40kohm bridging
Output Impedance: Balanced, 40 ohms maximum Zs
Dimensions: 1.5"H by 5.5"W by 5.75"D; Weight: 1.5 Lb. Net
Connectors: XLR (balanced input/outputs)
Power: 24VDC @ .07A, connector sleeve is positive
Power Supplies: All units require 24VDC power supply, which is ordered separately.
Nanoamps can share a single supply-using loop thru DC cable (P/N 20602-1).
Do not exceed rated supply current
WA100-1: Wall mount power supply (UL), 24VDC @ .4 amp, 115 VAC/60 Hz
WA100-2: Tabletop power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320
male 3 pin AC input connector. User supplies matching AC line cord for local
power system
BBU100-1: Battery Pack unit houses four 9V alkaline batteries (batteries not included).
Four-to-six-hour life
DC100-1: DC to DC converter powers several units from 12VDC mobile and belt pack
batteries. Supplies 24VDC @ .2amp maximum
20602-1: DC power cable assembly for looping the DC power between NanoAmps
DESK MOUNT KITS: 20617-501 Angled Desk Mount Base
20617-502 Angled Desk Mount Base and One Stacker (2 units high)
20617-503 Angled Desk Mount Base and Two Stackers (3 units high)
20617-504 Stacker (2 units high)
20617-505 Horizontal joiners for 2 units (side by side)
21075-501: Rack mount system mounts three units in one rack