Filter
Top Products
Tired of wiring your speakers ? Don’t like the cable mess of your audio equipment ?
Or do you want to connect equipment between different rooms without running wires ?
Are you afraid of going wireless because of performance trade-offs due to the noise,
distortions and low dynamics of 900 MHz analog wireless systems ? Then check out
the next generation of 5.8 GHz Digital Audio Transmission products from Amphony.
By transmitting the audio in a , the 5.8 GHz Digital
Wireless Audio Transmitter / Receiver from Amphony allow you
to eliminate the hassle of wires and give you absolute freedom
while maintaing crystal-clear audio quality.
Most importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony
transmits a (3 million bits per second) and since
is applied, you will experience without audio degradation
that you are used to from MP3 as well as other audio compression schemes.
Further, an
is employed which is capable of correcting
transmission errors to guarantee superior
error-free reception even under difficult
conditions.
The which is part of
the 5.8 GHz Digital Wireless Audio Receiver
from Amphony achieves a higher signal-to-noise
ratio compared to conventional digital-to-analog
converters by eliminating quantization noise
from the audible frequency band.
The wireless receiver connects to any passive
speakers or audio amplifier. By receiving the
audio signal at 5.8 Ghz, the receiver is
to interference from 2.4 GHz devices.
digital format
data rate of over 3 Mbps no audio
compression true CD quality
error correction mechanism
noise shaping filter
fully
immune
Tired of wiring your speakers ? Don’t like the cable mess of your audio equipment ?
Or
do you want to connect equipment between different rooms without running wires ?
Are
you afraid of going wireless because of performance trade-offs due to the noise,
distortions
and low dynamics of 900 MHz analog wireless systems ? Then check out
the
next generation of 5.8 GHz Digital Audio Transmission products from Amphony.
By
transmitting the audio in a,the 5.8 GHz Digital
Wireless Audio Transmitter
/ Receiver from Amphony allow you
to
eliminate the hassle of wires and give you absolute freedom
while
maintaing crystal-clear audio quality.
Most
importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony
transmits
a(3million bits per second) and since
is
applied, you will experience without audio degradation
that
you are used to from MP3 as well as other audio compression schemes.
Further,
an
is
employed which is capable of correcting
transmission
errors to guarantee superior
error-free
reception even under difficult
conditions.
The which
is part of
the
5.8 GHz Digital Wireless Audio Receiver
from Amphony
achieves a higher signal-to-noise
ratio
compared to conventional digital-to-analog
converters
by eliminating quantization noise
from
the audible frequency band.
The
wireless receiver connects to any passive
speakers
or audio amplifier. By receiving the
audio
signal at 5.8 Ghz, the receiver is
to
interference from 2.4 GHz devices.
digital
format
data rate of over 3 Mbps no audio
compression true
CD quality
error
correction mechanism
noise
shaping filter
fully
immune