Ampeg SVPCL Stereo Amplifier User Manual


 
Ampeg reserves the right to change specifications without notice.
Ampeg is proudly Made in America. ©2004 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N 47-836-01 • 012704
SVPCL Bass Preamp
www.ampeg.com
Technical Specifications
TONE CONTROL RANGE
ULTRA LOW: 1 = off; 2 = -3dB @ 30Hz; 3 = -3dB @ 200Hz; 4 = -20dB @ 600Hz; 5 = +9dB @ 30Hz
ULTRA HIGH: +16dB @ 8kHz
BRIGHT: +6dB @ 3kHz
BASS: +17dB / -13dB @ 20Hz
MID FREQ: +/-20dB @ 220Hz, 450Hz, 800Hz, 1.6kHz, or 3kHz
TREBLE: +15dB / -20dB @ 7kHz
GAIN 23dB
SIGNAL TO NOISE RATIO 80dB typical
TUBE COMPLEMENT (2) 12AX7, (2) 12AU7
POWER REQUIREMENTS 120VAC, 60Hz, 25VA
100/120VAC, 50/60Hz, 25VA
220-240VAC, 50/60Hz, 25VA
SIZE (W x H x D) AND WEIGHT 19” W x 1.75” H x 9.25” D, 9 lbs.
Declaration Of Conformity
#36, Effective 01-01-2001
Manufacturers Name: SLM Electronics
Production Facility: 1901 Congressional Drive, St. Louis, MO 63146, USA
Production Facility: 700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Office Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type: Audio Amplifier
Complies with the following Standards:
Safety: EN60065, E60065, C22.2, UL6500 and/or UL813
EMC: Directive 89/336/EEC, EN55103, EN55013, EN61000,
and/or FCC 47CFR 15B clA
Supplementary information provided by:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175