Filter
Top Products
SET-UP
NOTES:
• Do not connect the AC power plug before assembly has been completed.
• Before turning the power on, make sure once again all the connections and power voltage set-
tings are correct. Always turn off the power when connecting or disconnecting.
• Read this manual carefully before using the unit. Be sure to store the manual in a safe place for
future reference.
• Attach a stylus cartridge to the Headshell (10) before assembling the turntable unit.
Headshell and Cartridge Assembly:
When installing a cartridge, refer to the operating instructions of that cartridge. During installation,
attach the stylus protector to guard the stylus tip from damage.
Connect the Headshell (10) lead wires to the cartridge terminals. The terminals of cartridges
and the Headshell (10) lead wires are color coded. Connect each lead wire to the cartridge
terminals of the same color.
White (L+) .............……………......Left channel +
Blue (L-) ....……………................Left channel -
Red (R+) ..…………....................Right channel +
Green (R-) .......……………............Right channel -
Turntable Assembly:
1. Removing from carton:
Carefully remove the main unit with the packing material intact from the box. Remove the packing
material once the unit has been removed from the shipping carton. All accessories should be located
in the packing material.
2. Turntable Platter (1):
Remove the turntable platter from the packing material and gently insert the platter into the center
spindle on the base of the turntable unit.
3. Drive Hub:
Pull the belt to the lower side of the turntable over the drive hub.
4. Slipmat:
Remove the black slipmat from the packaging and place it on the Platter (1).
5. Headshell (10):
Insert the Headshell (12) into the front end of the Tonearm Assembly (2). While holding Headshell (10)
firmly into the front end of the tonearm assembly, turn the Headshell Locking Nut (11) counter-clock-
wise to firmly secure the Headshell (10) to Tonearm Assembly (2).
©American Audio® - www.americanaudio.us - TT-Record™ Instruction Manual Page 9