Filter
Top Products
©American Audio® - www.AmericanAudio.us - PXI 12P™ - Instruction Manual Page 7
Rear Panel:
9. MIC 1/LINE LEVEL XLR INPUT JACK - This jack is used for Microphone 1 and line level
inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines or Samplers should also be connected to the LINE
inputs. Do not connect mixers to this input, use the Balanced XLR or RCA Input (13 or
15) only!
10. MICROPHONE 1/LINE LEVEL INPUT LEVEL – This knob is used to regulate the output signal
of the microphone or CD player/tape deck that is connected to the Mic/Line Level 1 jack (9 &
11).
11. 1/4” MIC 1/LINE LEVEL INPUT JACK – This jack is used for a Microphone and line level in-
puts. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines, Keyboards or Samplers should also be connected
to LINE inputs.
12. LINE LEVEL INPUT LEVEL – This knob is used to regulate the output signal of the line level
source connected to the Line Level Input Jacks (13 & 15)
.
13. BALANCED RCA LINE INPUT – This connection is designed to accept a balanced line input
signal from a mixer or other line level device with a balanced output jack. Use a balanced cable
when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to
connect only line level input devices such as mixers and tape machines to this jack.
14. OUTPUT VOLUME – This knob is used to regulate the output signal being sent to another PXI
12P™ or other line level input jacks such as a mixer or power amp. (17 & 18).
P
XI 12P™ Rear Panel Controls and Features
Rear of PXI 12P™
9
17
16
15
14
13
12
11
10
22
21
20
19
18
25
24
23
LINE
IN
PXI 12P