Filter
Top Products
BASIC OPERATIONS (CONT.)
REPLAY LOOP - The RELOOP (10) function allows you to return to your
stored loop at any time. The
IN BUTTON (14) and OUT BUTTON (13) LEDs will
indicate a loop is stored in memory, and may be played at any time. To replay
the loop, press the RELOOP BUTTON (10). The IN BUTTON (14) and OUT BUT-
TON (13) LEDs will again begin to flash indicating SEAMLESS LOOP mode has
been activated and your stored loop will immediately begin to play.
Figure 20
Figure 19
©American Audio® - www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 21
10. CHANGING THE TIME DISPLAY (57)/TIME BAR (51):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (4), will change the
time display information in the LCD (21). The following is a break down of the
time settings and their definitions:
1) REMAIN (58) - This details the time in the LCD (21)
remaining running time.
2) ELAPSED (58) - This details the time in the
LCD (21)
elapsed running time.
3) TOTAL REMAIN (58) - This details the time in the LCD (21) as the current CD
total remaining running time.
TIME BAR INDICATOR - Details the time defined in the TIME METER (57) as a visual bar icon. As with the
TIME METER (57) this bar is also dependent on the selected time function [REMAIN, TOTAL REMAIN, OR
ELAPSED (58)]. This bar will begin to flash when a track is ending regardless of which time function you are in.
Use the flashing bar as a visual reminder that a track is ending.