Filter
Top Products
indicator is not displayed the unit is in continu-
ous mode
.
26. PITCH METER - This meter displays the
pitch percentage being applied to playback by
the PITCH SLIDER (8). If this meter displays zero
and the PITCH SLIDER'S (8) is not set to the zero
position, the PITCH (9) function is not activated.
27. TOTAL INDICATOR - When TOTAL is indicat-
ed in the LCD DISPLAY (4)
the TIME DESCRIBED
(29, 30, & 31) in the LCD (4) will define the total
disc remaining time.
28. REMAIN INDICATOR - This indicator is in
direct reference to the TIME METER (29, 30, &
31). When the REMAIN indicator is displayed in
the LCD (4), the time defined will refer to a single
track's remaining time. The time mode is changed
by tapping on TIME BUTTON (11).
29. FRAME METER - This meter will display the
elapse, or frames. The displayed frames will be
indirect reference to the current time mode.
30. SECONDS METER - This meter will display
the elapse, or remaining time in seconds. The
display time will be indirect reference to the cur
-
rent time mode.
31. MINUTES METER - This meter will display
the elapse, or remaining time in minutes. The dis
-
play time will be indirect reference to the current
time mode.
32. TRACK INDICATOR - This double digit indi-
cator details a current track. The number dis
-
played in the track indicator is a direct reference
to a track being selected for programming or a
track in play, pause, or cue mode.
FUNCTIONS AND CONTROLS
©American Audio® - www.americanaudio.com - MCD-110™ Instruction Manual Page 11