Nilfisk-ALTO Elvis Series Speaker User Manual


 
2. QUICK START - ACTIVE SPEAKER CABINET
3). Turn on your mixer first, then the active speaker cabinets.
-. For Active Full-range Speakers
1). Connect one side of the signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and
the other side of the cable in to the Line Input (COMBO) of your active speaker cabinet (with Stereo-Jack or XLR).
2). Connect the power cord to mains.
QUICK START
Elvis Active Full-range Speakers
5
Signal Cable
Power Cord
Tripod
Mount
Main Mix
Left
Output
Mixer
Tripod
Mount
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the
output level.
Power Cord
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely
down.
4). Turn up the volume control fo the active speaker cabinets.
6). After using, turn off your active speaker cabinets first, then the mixer.
Right
Output
Main Mix
Signal Cable