Nilfisk-ALTO A500.2 Stereo Amplifier User Manual


 
7
Output Connector
These NEUTRIK connectors are used to connect with your speakers.
9
AC Input
Use it to connect your A500.2 DRAGONFLY to the supplied AC cord only. Please
check the voltage in your country before attempting toconnect the unit with the
main AC.
10
Fuse Holder
The fuse can protect the AC supplies circuit of the equipment.
CAUTION: if there is something wrong with the fuse or the fuse needs to
-change, use only the recommended fuse type as indica ted in
-this unit. If the fuse continues to blow after replacing, discon
tinue using this unit before being repaired.
11
4. TECHNICAL SPECIFICATION
8 ohms per channel(EIAJ)
4 ohms per channel(EIAJ)
4 ohms per channel(RMS)
A500.2 DRAGONFLY
20Hz 20KHz@0.1%THD, Stereo Mode
MODEL
Controls
FRONT: Power switch, CH1 & CH2 LEVEL knobs
REAR: CH1 & CH2 LIMITER
Indicators (per channel)
Power-On: Green LED
Clip: Red LED
Limit: Yellow LED
Signal: Green LED
Connectors of each channel
Input: COMBO connector
Output: NEUTRIK Speak-on connector
Power Supply
190-240 Vac~50Hz / 95-120Vac~60Hz
Dimension
Net Weight
5. WARRANTY
1. WARRANTY REGISTRATION CARD
To obtain Warranty Service, the buyer should first fill out and return the enclosed Wa-
rranty Registration Card within 10 days of the Purchase Date.
260W
480W
245W (at THD 1%)
3.85 kg (8.49lb)
314W x 208.5D x 66.6H mm / 12.4" x 8.2" x 2.6"
Input Sensitivity @4 ohms
+3dBu