Filter
Top Products
DISTRIBUTION AMPLIFIERS
400-0016-004
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
DA1506RT Distribution Amplifier. Keep this manual
handy for future reference. These safety
instructions are to ensure the long life of your
DA1506RT and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 GENERAL
• Qualified ALTINEX service personnel or its
authorized representatives must perform all
service.
1.2. RACK-MOUNTING SAFETY GUIDELINES
• The maximum operating ambient temperature
for this unit is 35°C.
• Distribute units evenly inside the rack.
Hazardous conditions may be created by an
uneven weight distribution.
• Connect the unit to a properly rated circuit.
• Reliable grounding should be maintained.
1.3 HANDLING
• For best results, place the DA1506RT on a flat,
level surface in a dry area away from dust and
moisture.
• To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
DA1506RT in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
• Handle the DA1506RT carefully. Dropping or
jarring can damage internal components.
• Do not place heavy objects on top of the
DA1506RT. If the DA1506RT is to be mounted
to a table or wall, use only ALTINEX-made
mounting accessories.
• To turn off the main power, be sure to remove
the power cord. The power outlet should be
installed as near to the equipment as possible,
and should be easily accessible.
• Do not pull any cables that are attached to the
DA1506RT.
• If the DA1506RT is not used for an extended
period, disconnect the power cord.
1.4 CLEANING
• Unplug the DA1506RT before cleaning.
• Clean only with a dry cloth. Never use strong
detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.
1.4 FCC NOTICE
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.