Filter
Top Products
10-EN
Controlling CD Changer (Optional)
The CD controls on the TDM-7582E will function
only when a CD Changer (M-Bus) is connected.
1 Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
NOTE
To start play or pause playback, press the :/J button.
2 When a 6-disc CD Changer is connected:
Press the Preset buttons to select the desired
disc loaded in the CD Changer.
Switching between Track No. and
Elapsed Time Displays
1 Each press of the CLOCK button during CD
playback causes change of the display between
the track number and clock time.
2 Press and hold the CLOCK button for at least 2
seconds while the track number is displayed.
The display changes to show the elapsed time
for the track being played.
CD Changer Operation
g DN
f UP
CLOCK
REPEAT/M.I.X.SOURCE
Music Sensor (M.S.) Skip
1 Momentarily press the g DN button once to
return to the beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the f UP button once to advance to the
beginning of the next track.
If you wish to advance to the beginning of a track
further ahead, press repeatedly until the desired
track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1 Press and hold the g DN or f UP button to
quickly move backward or forward respectively
until you reach the desired portion.
NOTE
This feature works only in the CD playback mode.
Repeat Play on Single Track or
Entire Disc
1 Press the REPEAT button to display "REPEAT"
or "REPEAT ALL" to play back repeatedly the
current track being played or the entire disc
selected.
NOTE
Single track cannot be repeated during M.I.X. play.
Preset buttons
:/J