Filter
Top Products
15-EN
Erasing Disc Title/Radio Station Title
1
Press TITLE/ to select the Title Display. Then,
press again and hold for at least 2 seconds.
2
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE/ to cancel the title erasing mode.
• You cannot erase CD-TEXT.
• “NO DATA” is displayed for 2 seconds if the title is not input in
step 2, or if the title is erased in step 4.
Displaying Time
Press TITLE/ repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 14).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE/ to
display the time.
Setting Time
1
In the Clock priority mode, press and hold
TITLE/ for at least 2 seconds while the time is
displayed.
The time indication will blink.
2
Turn the Rotary encoder (CDE-9846 only) or
press
44
44
4 and
33
33
3 (CDE-9842 only) to adjust the
hours while the time indication is blinking.
3
When the hour has been adjusted, press the
Rotary encoder (CDE-9846 only) or press MODE
(CDE-9842 only).
4
Turn the Rotary encoder (CDE-9846 only) or
press
44
44
4 and
33
33
3 (CDE-9842 only) to adjust the
minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder (CDE-9846 only) or press
MODE (CDE-9842 only).
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder (CDE-9846
only) or press and hold MODE (CDE-9842 only) for at least 2
seconds after setting the “hour.” Minutes will reset to 00. If the
display shows over “30” minutes when you do this, the time will
advance one hour.
About “Title” and “Text”
Title:
With this device, it is possible to input the CD and radio
station name (this page). This inputted name is referred to as
a “title.”
You cannot input or display titles on MP3 discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• When the Scroll Setting (page 16) is set to “SCR MANU” for
CDE-9846, press and hold TITLE/ for at least 2 seconds to
scroll the Text information only once (TEXT DISPLAY, FOLDER
NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
• “NO SUPRT” is displayed when the desired text information
cannot be displayed on this unit.
• If the title was not previously input, “NO TITLE” is displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
Titling Discs/Radio Stations
It is possible to title your favourite CDs or radio stations.
You cannot input titles for MP3 discs.
1
Press TITLE/ and select the Title Display.
For details, see “Displaying the Title/Text” (page 14).
2
Press and hold TITLE/ for at least 2 seconds.
The first character will blink.
3
Turn the Rotary encoder (CDE-9846 only) or
press
44
44
4 and
33
33
3 (CDE-9842 only) to select the
desired letter/numeral/symbol available for naming.
4
Press the Rotary encoder (CDE-9846 only) or
press MODE (CDE-9842 only) to store the first
character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder (CDE-9846 only) or press
MODE (CDE-9842 only) after entering the 8th character
automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE/ to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 CD titles and 24 radio station titles on this unit. If
you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.
• When you want to erase a title, enter the “ ” symbol into all
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be canceled if no action is taken for
over 10 seconds.