Filter
Top Products
11-EN
Controlling CD Changer (Optional)
(CDM-7854E only)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7854E, you can control the CD changer
using the CDM-7854E.
NOTE
The CD controls on the CDM-7854E for the CD changer
operation are functional only when the CD Changer is
interconnected with the CDM-7854E.
1 Press the SOURCE button to activate the
changer mode.
The display shows the disc number and track
number.
2 Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CDM-7854E CD player.
For details, please see the CD Player Operation
section.
• If the "FUNC" indicator is illuminated the Disc Select
buttons become nonfunctional.
Repeat Play
1 Press the RPT(Repeat) button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the RPT button again and select OFF to
deactivate the repeat play.
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected (CDM-7854E only).
NOTE
In case a 6-disc CD changer is connected (CDM-7854E
only):
Press the "F" button to illuminate the "FUNC" indicator
and go to step 1.
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTE
In case a 6-disc CD changer is connected (CDM-7854E
only):
Press the "F" button to illuminate the "FUNC" indicator
and go to step 1.
Scanning Programmes
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected (CDM-7854E
only):
Press the "F" button to illuminate the "FUNC" indicator
and go to step 1.
→ REPEAT → REPEAT ALL → OFF