Filter
Top Products
15-EN
Scanning Programmes
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button to
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected:
Press the F button so that the F (Function) indicator
lights up, then go to step 1.
Press the F button to return to the normal mode.
The F indicator light goes out.
Displaying and Scrolling CD Text
While playing the audio CD with CD Text, the
disc and track names can be displayed and
scrolled.
1 In CD mode, press the TITLE button.
The mode will change every time the button is
pressed.
CD mode:
∗
Displayed during playback of text compatible
CD. "NO TEXT" will be displayed when the CD
is not text compatible.
Sample display when text compatible CD
NOTE
Some characters may not be displayed correctly with
this device, depending on the character type.
2 Press and hold the TITLE button for at least 3
seconds to scroll the information stored on the
disc.
After scrolling, the display returns to normal
mode.
NOTE
SCROLL: the display is scrolled only when a disc is
loaded or when a track is changed or when the power
turns ON during CD mode on this unit.
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text information
is referred to as "text."
ELAPSED TIME DISPLAY
↓
↓
↓
TEXT DISPLAY (TRACK NAME)
∗
TEXT DISPLAY (DISC NAME)
∗
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7859R/CDM-7858R/CDM-7856R, you
can control the CD Changer using the CDM-
7859R/CDM-7858R/CDM-7856R.
NOTE
The CD controls on the CDM-7859R/CDM-7858R/
CDM-7856R for the CD Changer operation are
functional only when the CD Changer is interconnected
with the CDM-7859R/CDM-7858R/CDM-7856R.
1 Press the SOURCE button to activate the CD
Changer.
The display shows "changer", the disc number
and track number.
NOTE
To start play or pause play, press the :/J button.
2 Make sure that the F (Function) indicator light
goes out, then press the Preset buttons to select
the desired disc loaded in the CD Changer.